Darren/dpaste
1
0
Fork 0
mirror of https://github.com/DarrenOfficial/dpaste.git synced 2024-11-15 08:02:54 +11:00
Code Issues Projects Releases Packages Wiki Activity

None of the server files are required anymore

Browse source
This commit is contained in:
Martin Mahner 2018-03-12 17:36:58 +01:00
parent 3224f22f8a
commit 88a072fe79
4 changed files with 0 additions and 965 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

19
server/logrotate.conf
View file

@ -1,19 +0,0 @@
/srv/dpaste.de/var/*.log {
monthly
rotate 52
dateext
missingok
compress
delaycompress
notifempty
create 0640 www-data adm
sharedscripts
prerotate
if [ -d /etc/logrotate.d/httpd-prerotate ]; then \
run-parts /etc/logrotate.d/httpd-prerotate; \
fi \
endscript
postrotate
invoke-rc.d nginx rotate >/dev/null 2>&1
endscript
}

120
server/nginx.conf
View file

@ -1,120 +0,0 @@
limit_req_zone $binary_remote_addr zone=login:10m rate=2r/s;
upstream app_server {
server 127.0.0.1:12000 fail_timeout=0;
}
# Combined log with remote:local port logged
log_format combined_port '$remote_addr - $remote_user [$time_local] '
'"$request" $status $body_bytes_sent '
'"$http_referer" "$http_user_agent" "$remote_port:$server_port"';
# -----------------------------------------------------------------------------
# Redirect all sort of non-ssl (with and without www) to ssl without www
# -----------------------------------------------------------------------------
server {
listen 80;
server_name dpaste.de
www.dpaste.de
dpaste.org
www.dpaste.org;
location / {
rewrite ^ https://$server_name$request_uri? permanent;
}
location /.well-known/acme-challenge/ {
alias /var/www/challenges/;
try_files $uri =404;
}
}
# -----------------------------------------------------------------------------
# SSL Hosts
# -----------------------------------------------------------------------------
server {
listen 443 ssl spdy;
server_name dpaste.org www.dpaste.org;
ssl on;
ssl_certificate /srv/dpaste.de/etc/ssl/dpaste_org_chained.pem;
ssl_certificate_key /srv/dpaste.de/etc/ssl/dpaste_org.key;
ssl_dhparam /etc/ssl/dhparam.pem;
# SSL modern config for modern browsers Pete told me
ssl_prefer_server_ciphers on;
ssl_protocols TLSv1.1 TLSv1.2;
ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK';
ssl_stapling on;
ssl_stapling_verify on;
add_header Strict-Transport-Security max-age=25200;
# Redirect to dpaste.de
location / {
rewrite ^/(.*)$ https://dpaste.de/$1 permanent;
}
}
server {
listen 443 ssl spdy;
server_name dpaste.de www.dpaste.de;
ssl on;
ssl_certificate /srv/dpaste.de/etc/ssl/dpaste_de_chained.pem;
ssl_certificate_key /srv/dpaste.de/etc/ssl/dpaste_de.key;
ssl_dhparam /etc/ssl/dhparam.pem;
# SSL modern config for modern browsers Pete told me
ssl_prefer_server_ciphers on;
ssl_protocols TLSv1.1 TLSv1.2;
ssl_ciphers 'ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!3DES:!MD5:!PSK';
ssl_stapling on;
ssl_stapling_verify on;
add_header Strict-Transport-Security max-age=25200;
# Rewrite www to non-www
if ($host = www.dpaste.de) {
rewrite ^/(.*)$ https://dpaste.de/$1 permanent;
}
access_log /var/log/nginx/dpaste.access.log combined_port;
error_log /var/log/nginx/dpaste.error.log;
keepalive_timeout 5;
client_max_body_size 10M;
location ~ /(favicon.ico|robots.txt) {
access_log off;
log_not_found off;
expires 3d;
}
location /webalizer/ {
alias /srv/dpaste.de/var/webalizer/;
auth_basic "Restricted";
auth_basic_user_file /srv/dpaste.de/var/.htpasswd;
}
location /static/ {
alias /srv/dpaste.de/var/static/;
}
location / {
limit_req zone=login burst=5;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header Host $http_host;
proxy_redirect off;
proxy_buffering off;
proxy_pass http://app_server;
break;
}
}

16
server/upstart.conf
View file

@ -1,16 +0,0 @@
start on (static-network-up and started mysql)
stop on shutdown
respawn
respawn limit 10 5
setuid www-data
setgid www-data
exec /srv/dpaste.de/bin/gunicorn dpaste.wsgi:application \
--user=www-data \
--group=www-data \
--workers=2 \
--error-logfile=/srv/dpaste.de/var/gunicorn.error.log \
--pid=/srv/dpaste.de/var/gunicorn.pid \
--bind=127.0.0.1:12000

810
server/webalizer.conf
View file

@ -1,810 +0,0 @@
#
# Sample Webalizer configuration file
# Copyright 1997-2013 by Bradford L. Barrett
#
# Distributed under the GNU General Public License. See the
# files "Copyright" and "COPYING" provided with the webalizer
# distribution for additional information.
#
# This is a sample configuration file for the Webalizer (ver 2.23)
# Lines starting with pound signs '#' are comment lines and are
# ignored. Blank lines are skipped as well. Other lines are considered
# as configuration lines, and have the form "ConfigOption Value" where
# ConfigOption is a valid configuration keyword, and Value is the value
# to assign that configuration option. Invalid keyword/values are
# ignored, with appropriate warnings being displayed. There must be
# at least one space or tab between the keyword and its value.
#
# As of version 0.98, The Webalizer will look for a 'default' configuration
# file named "webalizer.conf" in the current directory, and if not found
# there, will look for "/etc/webalizer.conf".
# LogFile defines the web server log file to use. If not specified
# here or on on the command line, input will default to STDIN. If
# the log filename ends in '.gz' (a gzip compressed file), or '.bz2'
# (bzip2 compressed file), it will be decompressed on the fly as it
# is being read.
LogFile /var/log/nginx/dpaste.access.log.1
# LogType defines the log type being processed. Normally, the Webalizer
# expects a CLF or Combined web server log as input. Using this option,
# you can process ftp logs (xferlog as produced by wu-ftp and others),
# Squid native logs or W3C extended format web logs. Values can be 'clf',
# 'ftp', 'squid' or 'w3c'. The default is 'clf'.
#LogType clf
# OutputDir is where you want to put the output files. This should
# should be a full path name, however relative ones might work as well.
# If no output directory is specified, the current directory will be used.
OutputDir /srv/dpaste.de/var/webalizer
# HistoryName allows you to specify the name of the history file produced
# by the Webalizer. The history file keeps the data for previous months,
# and is used for generating the main HTML page (index.html). The default
# is a file named "webalizer.hist", stored in the output directory being
# used. The name can include a path, which will be relative to the output
# directory unless absolute (starts with a leading '/').
#HistoryName webalizer.hist
# Incremental processing allows multiple partial log files to be used
# instead of one huge one. Useful for large sites that have to rotate
# their log files more than once a month. The Webalizer will save its
# internal state before exiting, and restore it the next time run, in
# order to continue processing where it left off. This mode also causes
# The Webalizer to scan for and ignore duplicate records (records already
# processed by a previous run). See the README file for additional
# information. The value may be 'yes' or 'no', with a default of 'no'.
# The file 'webalizer.current' is used to store the current state data,
# and is located in the output directory of the program (unless changed
# with the IncrementalName option below). Please read at least the section
# on Incremental processing in the README file before you enable this option.
Incremental yes
# IncrementalName allows you to specify the filename for saving the
# incremental data in. It is similar to the HistoryName option where the
# name is relative to the specified output directory, unless an absolute
# filename is specified. The default is a file named "webalizer.current"
# kept in the normal output directory. If you don't specify "Incremental"
# as 'yes' then this option has no meaning.
IncrementalName webalizer.current
# ReportTitle is the text to display as the title. The hostname
# (unless blank) is appended to the end of this string (separated with
# a space) to generate the final full title string.
# Default is (for english) "Usage Statistics for".
ReportTitle Usage statistics for
# HostName defines the hostname for the report. This is used in
# the title, and is prepended to the URL table items. This allows
# clicking on URLs in the report to go to the proper location in
# the event you are running the report on a 'virtual' web server,
# or for a server different than the one the report resides on.
# If not specified here, or on the command line, webalizer will
# try to get the hostname via a uname system call. If that fails,
# it will default to "localhost".
HostName dpaste.de
# HTMLExtension allows you to specify the filename extension to use
# for generated HTML pages. Normally, this defaults to "html", but
# can be changed for sites who need it (like for PHP embeded pages).
#HTMLExtension html
# PageType lets you tell the Webalizer what types of URLs you
# consider a 'page'. Most people consider html and cgi documents
# as pages, while not images and audio files. If no types are
# specified, defaults will be used ('htm*', 'cgi' and HTMLExtension
# if different for web logs, 'txt' for ftp logs).
PageType htm*
PageType cgi
#PageType phtml
PageType php3
#PageType pl
PageType php
# PagePrefix allows all requests with a specified prefix to be
# considered as 'pages'. If you want everything under /documents
# to be treated as pages no matter what their extension is. Also
# useful if you have cgi-scripts with PATH_INFO.
#PagePrefix /documents
#PagePrefix /mycgi/parameters
# OmitPage lets you tell the Webalizer that certain URLs do not
# contain any pages. No URL matching an OmitPage value will be
# counted as a page, even if it matches a PageType above or has
# no extension (e.g., a directory). They will still be counted
# as a hit.
#OmitPage /render
# UseHTTPS should be used if the analysis is being run on a
# secure server, and links to urls should use 'https://' instead
# of the default 'http://'. If you need this, set it to 'yes'.
# Default is 'no'. This only changes the behaviour of the 'Top
# URLs' table.
UseHTTPS yes
# HTAccess allows the generation of a default .htaccess file in the
# output directory. If enabled, a default .htaccess file will be
# created (with a single "DirectoryIndex" directive), unless one
# already exists. Values may be 'yes' or 'no', with 'no'
# being the default (don't write .htaccess files).
#HTAccess no
# StripCGI determines if URL CGI variables should be striped or not.
# Historically, the Webalizer stripped all CGI variables from the end
# of URLs to improve accuracy. Some sites may prefer to keep the CGI
# variables in place, particularly those with highly dynamic pages.
# Values may be 'yes' or 'no', with the default being 'yes'.
#StripCGI yes
# The TrimSquidURL option only has effect on squid type log files.
# When analyzing a squid log, it is usually desirable to have less
# granularity on the URLs. TrimSquidURL = n where n is a number > 0
# causes all URLs to be truncated after the nth '/' after the http://
# portion. Setting TrimSquidURL to one (1) will cause all URLs to be
# summarized by domain only. The default is zero (0), which disables
# any such truncation and preserve the URLs as they are in the log.
# TrimSquidURL 0
# DNSCache specifies the DNS cache filename to use for reverse DNS lookups.
# This file must be specified if you wish to perform name lookups on any IP
# addresses found in the log file. If an absolute path is not given as
# part of the filename (ie: starts with a leading '/'), then the name is
# relative to the default output directory. See the DNS.README file for
# additional information.
#DNSCache dns_cache.db
# DNSChildren allows you to specify how many "children" processes are
# run to perform DNS lookups to create or update the DNS cache file.
# If a number is specified, the DNS cache file will be created/updated
# each time the Webalizer is run, immediately prior to normal processing,
# by running the specified number of "children" processes to perform
# DNS lookups. If used, the DNS cache filename MUST be specified as
# well. The default value is zero (0), which disables DNS cache file
# creation/updates at run time. The number of children processes to
# run may be anywhere from 1 to 100, however a large number may affect
# normal system operations. Reasonable values should be between 5 and
# 20. See the DNS.README file for additional information.
#DNSChildren 0
# CacheIPs allows unresolved IP addresses to be cached in the DNS
# database. Normally, only resolved addresses are saved. At some
# sites, particularly those with a large number of unresolvable IP
# addresses visiting, it may be useful to enable this feature so
# those addresses are not constantly looked up each time the program
# is run. Values can be 'yes' or 'no', with 'no' being the default.
#CacheIPs no
# CacheTTL specifies the time to live (TTL) value for cached DNS
# entries, in days. This value may be anywhere between 1 and 100
# with the default being 7 days (1 week).
#CacheTTL 7
# The GeoDB option enables or disabled the use of the native
# Webalizer GeoDB geolocation services. This is the preferred
# geolocation option. Values may be 'yes' or 'no', with 'no'
# being the default.
#GeoDB yes
# GeoDBDatabase specifies an alternate database to use. The
# default database is /usr/share/GeoDB/GeoDB.dat (however the
# path may be changed at compile time; use the -vV command
# line option to determine where). If a different database is
# to be used, it may be specified here. The name is relative
# to the output directory being used unless an absolute name
# (ie: starts with a leading '/') is specified.
#GeoDBDatabase /usr/share/GeoIP/GeoIP.dat
# The GeoIP option enables or disables the use of geolocation
# services provided by the GeoIP library (http://www.maxmind.com),
# if available. Values may be 'yes' or 'no, with 'no' being the
# default. Note: if GeoDB is enabled, then this option will have
# no effect (GeoDB will be used regardless of this setting).
GeoIP yes
# GeoIPDatabase specifies an alternate database filename to use by the
# GeoIP library. If an absolute path is not given as part of the name
# (ie: starts with a leading '/'), then the name is relative to the
# default output directory. This option should not normally be needed.
GeoIPDatabase /usr/share/GeoIP/GeoIP.dat
# HTMLPre defines HTML code to insert at the very beginning of the
# file. Default is the DOCTYPE line shown below. Max line length
# is 80 characters, so use multiple HTMLPre lines if you need more.
#HTMLPre <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
# HTMLHead defines HTML code to insert within the <HEAD></HEAD>
# block, immediately after the <TITLE> line. Maximum line length
# is 80 characters, so use multiple lines if needed.
#HTMLHead <META NAME="author" CONTENT="The Webalizer">
#HTMLHead <META NAME="ROBOTS" CONTENT="NOINDEX, NOFOLLOW">
# HTMLBody defined the HTML code to be inserted, starting with the
# <BODY> tag. If not specified, the default is shown below. If
# used, you MUST include your own <BODY> tag as the first line.
# Maximum line length is 80 char, use multiple lines if needed.
#HTMLBody <BODY BGCOLOR="#E8E8E8" TEXT="#000000" LINK="#0000FF" VLINK="#FF0000">
# HTMLPost defines the HTML code to insert immediately before the
# first <HR> on the document, which is just after the title and
# "summary period"-"Generated on:" lines. If anything, this should
# be used to clean up in case an image was inserted with HTMLBody.
# As with HTMLHead, you can define as many of these as you want and
# they will be inserted in the output stream in order of apperance.
# Max string size is 80 characters. Use multiple lines if you need to.
#HTMLPost <BR CLEAR="all">
# HTMLTail defines the HTML code to insert at the bottom of each
# HTML document, usually to include a link back to your home
# page or insert a small graphic. It is inserted as a table
# data element (ie: <TD> your code here </TD>) and is right
# alligned with the page. Max string size is 80 characters.
#HTMLTail <IMG SRC="msfree.png" ALT="100% Micro$oft free!">
# HTMLEnd defines the HTML code to add at the very end of the
# generated files. It defaults to what is shown below. If
# used, you MUST specify the </BODY> and </HTML> closing tags
# as the last lines. Max string length is 80 characters.
#HTMLEnd </BODY></HTML>
# The LinkReferrer option determines if entries in the referrer table
# should be plain text or a HTML link to the referrer. Values can be
# either 'yes' or 'no', with 'no' being the default.
LinkReferrer yes
# The Quiet option suppresses output messages... Useful when run
# as a cron job to prevent bogus e-mails. Values can be either
# "yes" or "no". Default is "no". Note: this does not suppress
# warnings and errors (which are printed to stderr).
#Quiet no
# ReallyQuiet will supress all messages including errors and
# warnings. Values can be 'yes' or 'no' with 'no' being the
# default. If 'yes' is used here, it cannot be overriden from
# the command line, so use with caution. A value of 'no' has
# no effect.
#ReallyQuiet no
# TimeMe allows you to force the display of timing information
# at the end of processing. A value of 'yes' will force the
# timing information to be displayed. A value of 'no' has no
# effect.
#TimeMe no
# GMTTime allows reports to show GMT (UTC) time instead of local
# time. Default is to display the time the report was generated
# in the timezone of the local machine, such as EDT or PST. This
# keyword allows you to have times displayed in UTC instead. Use
# only if you really have a good reason, since it will probably
# screw up the reporting periods by however many hours your local
# time zone is off of GMT.
#GMTTime no
# Debug prints additional information for error messages. This
# will cause webalizer to dump bad records/fields instead of just
# telling you it found a bad one. As usual, the value can be
# either "yes" or "no". The default is "no". It shouldn't be
# needed unless you start getting a lot of Warning or Error
# messages and want to see why. (Note: warning and error messages
# are printed to stderr, not stdout like normal messages).
#Debug no
# FoldSeqErr forces the Webalizer to ignore sequence errors.
# This is useful for Netscape and other web servers that cache
# the writing of log records and do not guarentee that they
# will be in chronological order. The use of the FoldSeqErr
# option will cause out of sequence log records to be treated
# as if they had the same time stamp as the last valid record.
# Default is to ignore out of sequence log records. The use
# of this feature is strongly discouraged and rarely needed.
# (the webalizer already compensates for up to 60 minutes of
# difference between records).
#FoldSeqErr no
# VisitTimeout allows you to set the default timeout for a visit
# (sometimes called a 'session'). The default is 30 minutes,
# which should be fine for most sites.
# Visits are determined by looking at the time of the current
# request, and the time of the last request from the site. If
# the time difference is greater than the VisitTimeout value, it
# is considered a new visit, and visit totals are incremented.
# Value is the number of seconds to timeout (default=1800=30min)
#VisitTimeout 1800
# IgnoreHist shouldn't be used in a config file, but it is here
# just because it might be usefull in certain situations. If the
# history file is ignored, the main "index.html" file will only
# report on the current log files contents. Usefull only when you
# want to reproduce the reports from scratch. USE WITH CAUTION!
# Valid values are "yes" or "no". Default is "no".
#IgnoreHist no
# IgnoreState also shouldn't be used, but is here anyway. It is
# similar to the IgnoreHist option, but for the incremental data
# file. If this is set to 'yes', any existing incremental data
# will be ignored and a new data file will be written at the end
# of processing. USE WITH CAUTION. By ignoring an existing
# incremental data file, all previous processing for the current
# month will be lost, and those logs must be re-processed.
# Valid values are "yes" or "no". Default is "no".
#IgnoreState no
# CountryGraph allows the usage by country graph to be disabled.
# Values can be 'yes' or 'no', default is 'yes'.
#CountryGraph yes
# CountryFlags allows flags to be displayed in the top country
# table in monthly reports. Values can be 'yes' or 'no', with
# the default being 'no'.
#CountryFlags no
# FlagDir specifies the location of flag graphics which will be
# used in the top country table. If not specified, the default
# is to look in the 'flags' directory directly under the output
# directory being used for the reports. If this option is used,
# the display of flag graphics will be enabled by default.
#FlagDir flags
# DailyGraph and DailyStats allows the daily statistics graph
# and statistics table to be disabled (not displayed). Values
# may be "yes" or "no". Default is "yes".
#DailyGraph yes
#DailyStats yes
# HourlyGraph and HourlyStats allows the hourly statistics graph
# and statistics table to be disabled (not displayed). Values
# may be "yes" or "no". Default is "yes".
#HourlyGraph yes
#HourlyStats yes
# GraphLegend allows the color coded legends to be turned on or off
# in the graphs. The default is for them to be displayed. This only
# toggles the color coded legends, the other legends are not changed.
# If you think they are hideous and ugly, say 'no' here :)
#GraphLegend yes
# GraphLines allows you to have index lines drawn behind the graphs.
# I personally am not crazy about them, but a lot of people requested
# them and they weren't a big deal to add. The number represents the
# number of lines you want displayed. Default is 2, you can disable
# the lines by using a value of zero ('0'). [max is 20]
# Note, due to rounding errors, some values don't work quite right.
# The lower the better, with 1,2,3,4,6 and 10 producing nice results.
#GraphLines 2
# IndexMonths defines the number of months to display in the main index
# (yearly summary) table. Value can be between 12 and 120, with the
# default being 12 months (1 year).
#IndexMonths 12
# YearHeaders enables/disables the display of year headers in the main
# index (yearly summary) table. If enabled, year headers will be shown
# when the table is displaying more than 16 months worth of data. Values
# can be 'yes' or 'no', with 'yes' being the default.
#YearHeaders yes
# YearTotals enables/disables the display of yearly totals in the main
# index (yearly summary) table. If enabled, year totals will be shown
# when the table is displaying more than 16 months worth of data. Values
# can be 'yes' or 'no', with 'yes' being the default.
#YearTotals yes
# GraphMonths defines the number of months to display in the main index
# (yearly summary) graph. Value can be between 12 and 72 months, with
# the default being 12 months.
#GraphMonths 12
# Enable Input Output data as reported by apache_logio module.
# Note for this to work you need the following in your apache configuration
# LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# CustomLog /var/log/apache2/access.log combinedio
# webalizer can try to be smart and detect whether your log contains logio
# information or not, to enable this use the 'auto' value.
# Values can be 'yes','no' or 'auto', the later being the default.
#
#InOutkB auto
# The "Top" options below define the number of entries for each table.
# Defaults are Sites=30, URLs=30, Referrers=30 and Agents=15, and
# Countries=30. TopKSites and TopKURLs (by KByte tables) both default
# to 10, as do the top entry/exit tables (TopEntry/TopExit). The top
# search strings and usernames default to 20. Tables may be disabled
# by using zero (0) for the value.
#TopSites 30
#TopKSites 10
#TopURLs 30
#TopKURLs 10
#TopReferrers 30
#TopAgents 15
#TopCountries 30
#TopEntry 10
#TopExit 10
#TopSearch 20
#TopUsers 20
# The All* keywords allow the display of all URLs, Sites, Referrers
# User Agents, Search Strings and Usernames. If enabled, a separate
# HTML page will be created, and a link will be added to the bottom
# of the appropriate "Top" table. There are a couple of conditions
# for this to occur.. First, there must be more items than will fit
# in the "Top" table (otherwise it would just be duplicating what is
# already displayed). Second, the listing will only show those items
# that are normally visable, which means it will not show any hidden
# items. Grouped entries will be listed first, followed by individual
# items. The value for these keywords can be either 'yes' or 'no',
# with the default being 'no'. Please be aware that these pages can
# be quite large in size, particularly the sites page, and separate
# pages are generated for each month, which can consume quite a lot
# of disk space depending on the traffic to your site.
#AllSites no
#AllURLs no
#AllReferrers no
#AllAgents no
#AllSearchStr no
#AllUsers no
# The Webalizer normally strips the string 'index.' off the end of
# URLs in order to consolidate URL totals. For example, the URL
# /somedir/index.html is turned into /somedir/ which is really the
# same URL. This option allows you to specify additional strings
# to treat in the same way. You don't need to specify 'index.' as
# it is always scanned for by The Webalizer, this option is just to
# specify _additional_ strings if needed. If you don't need any,
# don't specify any as each string will be scanned for in EVERY
# log record... A bunch of them will degrade performance. Also,
# the string is scanned for anywhere in the URL, so a string of
# 'home' would turn the URL /somedir/homepages/brad/home.html into
# just /somedir/ which is probably not what was intended.
#IndexAlias home.htm
#IndexAlias homepage.htm
# The DefaultIndex option is used to enable/disable the use of
# "index." as the default index name to be stripped off the end of
# a URL (as described above). Most sites will not need to use this
# option, but some may, such as those whose default index file name
# is different, or those that use "index.php" or similar URLs in a
# dynamic environment. Values can be 'yes' or 'no', with the default
# being 'yes'. This option does not effect any names added using the
# IndexAlias option, and those names will still function as described
# regardless of this setting.
#DefaultIndex yes
# The Hide*, Group* and Ignore* and Include* keywords allow you to
# change the way Sites, URLs, Referrers, User Agents and Usernames
# are manipulated. The Ignore* keywords will cause The Webalizer to
# completely ignore records as if they didn't exist (and thus not
# counted in the main site totals). The Hide* keywords will prevent
# things from being displayed in the 'Top' tables, but will still be
# counted in the main totals. The Group* keywords allow grouping
# similar objects as if they were one. Grouped records are displayed
# in the 'Top' tables and can optionally be displayed in BOLD and/or
# shaded. Groups cannot be hidden, and are not counted in the main
# totals. The Group* options do not, by default, hide all the items
# that it matches. If you want to hide the records that match (so just
# the grouping record is displayed), follow with an identical Hide*
# keyword with the same value. (see example below) In addition,
# Group* keywords may have an optional label which will be displayed
# instead of the keywords value. The label should be separated from
# the value by at least one 'white-space' character, such as a space
# or tab. If the match string contains whitespace (spaces or tabs),
# the string should be quoted with either single or double quotes.
#
# The value can have either a leading or trailing '*' wildcard
# character. If no wildcard is found, a match can occur anywhere
# in the string. Given a string "www.yourmama.com", the values "your",
# "*mama.com" and "www.your*" will all match.
# Your own site should be hidden
HideSite dpaste.de
HideSite localhost
# Your own site gives most referrals
HideReferrer dpaste.de
# This one hides non-referrers ("-" Direct requests)
HideReferrer Direct Request
# Usually you want to hide these
HideURL *.gif
HideURL *.GIF
HideURL *.jpg
HideURL *.JPG
HideURL *.png
HideURL *.PNG
HideURL *.ra
HideURL *.css
# Hiding agents is kind of futile
#HideAgent RealPlayer
# You can also hide based on authenticated username
#HideUser root
#HideUser admin
# Grouping options
#GroupURL /cgi-bin/* CGI Scripts
#GroupURL /images/* Images
#GroupSite *.aol.com
#GroupSite *.compuserve.com
#GroupReferrer yahoo.com/ Yahoo!
#GroupReferrer excite.com/ Excite
#GroupReferrer infoseek.com/ InfoSeek
#GroupReferrer webcrawler.com/ WebCrawler
#GroupUser root Admin users
#GroupUser admin Admin users
#GroupUser wheel Admin users
# The following is a great way to get an overall total
# for browsers, and not display all the detail records.
# (You should use MangleAgent to refine further...)
#GroupAgent Opera/ Opera
#HideAgent Opera/
#GroupAgent "MSIE 7" Microsoft Internet Exploder 7
#HideAgent MSIE 7
#GroupAgent "MSIE 6" Microsoft Internet Exploder 6
#HideAgent MSIE 6
#GroupAgent "MSIE " Older Microsoft Exploders
#HideAgent MSIE
#GroupAgent Firefox/2. Firefox 2
#HideAgent Firefox/2.
#GroupAgent Firefox/1. Firefox 1.x
#HideAgent Firefox/1.
#GroupAgent Konqueror Konqueror
#HideAgent Konqueror
#GroupAgent Safari Safari
#HideAgent Safari
#GroupAgent Lynx* Lynx
#HideAgent Lynx*
#GroupAgent Wget/ WGet
#HideAgent Wget/
#GroupAgent (compatible; Other Mozilla Compatibles
#HideAgent (compatible;
#GroupAgent Mozilla* Mozilla/Netscape
#HideAgent Mozilla*
# HideAllSites allows forcing individual sites to be hidden in the
# report. This is particularly useful when used in conjunction
# with the "GroupDomain" feature, but could be useful in other
# situations as well, such as when you only want to display grouped
# sites (with the GroupSite keywords...). The value for this
# keyword can be either 'yes' or 'no', with 'no' the default,
# allowing individual sites to be displayed.
#HideAllSites no
# The GroupDomains keyword allows you to group individual hostnames
# into their respective domains. The value specifies the level of
# grouping to perform, and can be thought of as 'the number of dots'
# that will be displayed. For example, if a visiting host is named
# cust1.tnt.mia.uu.net, a domain grouping of 1 will result in just
# "uu.net" being displayed, while a 2 will result in "mia.uu.net".
# The default value of zero disable this feature. Domains will only
# be grouped if they do not match any existing "GroupSite" records,
# which allows overriding this feature with your own if desired.
#GroupDomains 0
# The GroupShading allows grouped rows to be shaded in the report.
# Useful if you have lots of groups and individual records that
# intermingle in the report, and you want to diferentiate the group
# records a little more. Value can be 'yes' or 'no', with 'yes'
# being the default.
#GroupShading yes
# GroupHighlight allows the group record to be displayed in BOLD.
# Can be either 'yes' or 'no' with the default 'yes'.
#GroupHighlight yes
# The Ignore* keywords allow you to completely ignore log records based
# on hostname, URL, user agent, referrer or username. I hesitated in
# adding these, since the Webalizer was designed to generate _accurate_
# statistics about a web servers performance. By choosing to ignore
# records, the accuracy of reports become skewed, negating why I wrote
# this program in the first place. However, due to popular demand, here
# they are. Use the same as the Hide* keywords, where the value can have
# a leading or trailing wildcard '*'. Use at your own risk ;) Please
# remember, the use of these will MAKE YOUR STATS INACCURATE and you
# should consider using an equivalent 'Hide*' keyword instead.
#IgnoreSite bad.site.net
IgnoreSite localhost
#IgnoreURL /test*
#IgnoreReferrer file:/*
IgnoreReferrer localhost
#IgnoreAgent RealPlayer
#IgnoreUser root
# The Include* keywords allow you to force the inclusion of log records
# based on hostname, URL, user agent, referrer or username. They take
# precidence over the Ignore* keywords. Note: Using Ignore/Include
# combinations to selectivly process parts of a web site is _extremely
# inefficent_!!! Avoid doing so if possible (ie: grep the records to a
# separate file if you really want that kind of report).
# Example: Only show stats on Joe User's pages...
#IgnoreURL *
#IncludeURL ~joeuser*
# Or based on an authenticated username
#IgnoreUser *
#IncludeUser someuser
# The MangleAgents allows you to specify how much, if any, The Webalizer
# should mangle user agent names. This allows several levels of detail
# to be produced when reporting user agent statistics. There are six
# levels that can be specified, which define different levels of detail
# supression. Level 5 shows only the browser name (MSIE or Mozilla)
# and the major version number. Level 4 adds the minor version number
# (single decimal place). Level 3 displays the minor version to two
# decimal places. Level 2 will add any sub-level designation (such
# as Mozilla/3.01Gold or MSIE 3.0b). Level 1 will attempt to also add
# the system type if it is specified. The default Level 0 displays the
# full user agent field without modification and produces the greatest
# amount of detail. User agent names that can't be mangled will be
# left unmodified.
#MangleAgents 0
# The SearchEngine keywords allow specification of search engines and
# their query strings on the URL. These are used to locate and report
# what search strings are used to find your site. The first word is
# a substring to match in the referrer field that identifies the search
# engine, and the second is the URL variable used by that search engine
# to define its search terms.
SearchEngine .google. q=
SearchEngine yahoo.com p=
SearchEngine altavista.com q=
SearchEngine aolsearch. query=
SearchEngine ask.co q=
SearchEngine eureka.com q=
SearchEngine lycos.com query=
SearchEngine hotbot.com MT=
SearchEngine msn.com q=
SearchEngine infoseek.com qt=
SearchEngine excite search=
SearchEngine netscape.com query=
SearchEngine mamma.com query=
SearchEngine alltheweb.com q=
SearchEngine northernlight.com qr=
SearchEngine sensis.com.au find=
# Normally, search strings are converted to lower case in order to
# increase accuracy. The SearchCaseI option allows them to maintain
# case sensitivity, useful for some sites. The value can be 'yes'
# or 'no', with 'yes' (case insensitive) being the default.
#SearchCaseI yes
# The Dump* keywords allow the dumping of Sites, URLs, Referrers
# User Agents, Usernames and Search strings to separate tab delimited
# text files, suitable for import into most database or spreadsheet
# programs.
# DumpPath specifies the path to dump the files. If not specified,
# it will default to the current output directory. Do not use a
# trailing slash ('/').
#DumpPath /var/lib/httpd/logs
# The DumpHeader keyword specifies if a header record should be
# written to the file. A header record is the first record of the
# file, and contains the labels for each field written. Normally,
# files that are intended to be imported into a database system
# will not need a header record, while spreadsheets usually do.
# Value can be either 'yes' or 'no', with 'no' being the default.
#DumpHeader no
# DumpExtension allow you to specify the dump filename extension
# to use. The default is "tab", but some programs are pickey about
# the filenames they use, so you may change it here (for example,
# some people may prefer to use "csv").
#DumpExtension tab
# These control the dumping of each individual table. The value
# can be either 'yes' or 'no'.. the default is 'no'.
#DumpSites no
#DumpURLs no
#DumpReferrers no
#DumpAgents no
#DumpUsers no
#DumpSearchStr no
# The custom graph colors are defined here. Declare them
# in the standard hexadecimal way (as HTML, without the '#')
# If none are given, you will get the standard default colors.
#ColorHit 00805c
#ColorFile 0040ff
#ColorSite ff8000
#ColorKbyte ff0000
#ColorIKbyte 0080ff
#ColorOKbyte 00e000
#ColorPage 00e0ff
#ColorVisit ffff00
#ColorMisc 00e0ff
#PieColor1 800080
#PieColor2 80ffc0
#PieColor3 ff00ff
#PieColor4 ffc080
# TrueTypeFont makes possible to replace GD built-in font by
# specified TrueTypeFont.
# The value can be '/path/to/your/true_type_font.file' or empty.
# If value is empty(or commented out), GD built-in font will be used.
# The default is empty.
# (Supplement for Japanese:
# Under EUC-JP locale, TTF file must be specified which has *Windows
# Shift-JIS encoding*. This limitation is derived from libgd.
# e.g. you can use "/usr/share/fonts/truetype/X-TT/wadalab-gothic.ttf"
# provided by ttf-xtt-wadalab-gothic package)
#TrueTypeFont
# End of configuration file... Have a nice day!